1) There is an obstruction in the installation place
Sunlight is the main source of energy for solar street lights. If there are obstacles around, such as big trees or buildings, it will inevitably affect the sunlight, and the solar panels cannot receive enough light energy, which will affect the use of street lights. up.
In addition to covering the solar panel in such a large area, it is also not acceptable to cover the solar panel in a small area. In the open circuit state, it is still a trivial matter to affect the absorption and utilization of light energy. If things go on like this, it will cause damage to the battery panel itself and shorten the service life.
Therefore, if the environment does not permit the installation of solar street lights, then at least ensure that the space above the battery panels is open and there is no shelter, so as to bring a good user experience; in addition, one thing to pay attention to, some friends are in Install solar street lights in the garage. In this case, it is best to use a separate installation method. The battery panel is installed outdoors in an unobstructed place, and the light source is installed indoors.
2) There are other light sources in the installation place
Many people often make this mistake when installing solar garden lights. In order to ensure lighting efficiency and save energy, solar street lights generally choose the dual control mode of light control + time control. If there are other light sources next to the solar street light , it is very likely that the charging voltage of the solar panel will be above the light control voltage point, and the light cannot be turned on.
Generally speaking, it will make solar street lights think that it is daytime, so the light source is not given. Therefore, it is necessary to avoid other light sources within a certain range during installation.
(3) Symmetrical installation of solar street lights
Things are symmetrical, and the visual sense is always good. Therefore, when solar street lights need to be installed on both sides of the road, some people who do not understand the basics may install solar panels symmetrically.
It seems that the solar panels are all exposed to the sun and receive the sunlight well, but in fact, the solar panels are installed at different angles, and their utilization rate of sunlight is also very different, no matter the angle of inclination or the installation direction, There are certain scientific principles. To install solar street lights according to these principles, you can refer to the latitude and longitude of the installation location for details. Symmetrical installation is absolutely not advisable.
4) Extend the connecting line at will
Although it has also been mentioned above that when installing solar street lights in places like garages, it is best to install them separately, but this does not mean that the connecting lines of the solar panels can be extended at will, or even connected with wires at will.
The longer the line, the more power is lost during transportation, and the efficiency of the solar street light will be reduced, and if the quality of the wire itself is not very good, it will increase the line loss. To control a certain range, the wire should also be carefully selected.
(5) Parameter setting error
A very important part of installing solar street lights is that there is a stage of trial operation, and you will use the engineering remote control to operate to see if the functions of the solar street lights are normal. Controlling this still requires a certain degree of professionalism.
If the construction workers don’t know the function of the remote control, they press randomly, thinking that it’s okay when the light is on, but in many cases, it is very likely that the parameters have been set incorrectly, resulting in abnormal lighting of the street light, so to avoid this situation, a It is to ensure the professionalism of the construction personnel. On the other hand, you can also choose a humanized remote control, which is simple and convenient to operate and avoid these problems.
Post time: Nov-30-2022